Xoar PJP-T Carbon Fiber Precision Pair is for model planes and multi-axial model helicopters that use a pair(s) of 1 CW (clockwise) on one arm and 1 CCW (counterclockwise) prop on the opposite arm.
The concept of PJP-T Carbon Fiber Precision Pair was based on Carbon Fiberís two major advantages: weight and strength in order to provide the most accurate and responsive performance. Each Xoar Precision Pair is produced with the same pitch, same angle of attack, and same weight in order to create accurate, responsive and stable performance. We have tight quality assurance when pairing each precision pair because propeller weight is the most important factor in multi-axial applications. The maximum tolerance in terms of weight difference for each prop in precision pair is 0.5 gram; this will guarantee consistent performance due to same torque being produced by the motors on each pair of opposite arms. Therefore, ONLY the best Xoar Carbon Fiber Props tested with great static, dynamic equilibrium are selected and packaged as Xoar's Carbon Fiber Precision Pair.
Xoar has successfully reduced weight on Carbon fiber props by ~37% compared to the first gen after continuous research and development; we produce one of the lightest yet strong propellers in the marketing today.
In addition, Xoar PJP-T Carbon Fiber Props also maximize your motorís efficiency because vibration is minimized due to Carbon Fiberís stiffness and light-weight; a light Xoar Carbon Fiber prop with high flex resistance yields less amplitude vibrations due to less kinetic energy and consumes less time to speed up and slow down.
Xoar Precision Pair is also available in beechwood.
Yonder Blue Films.
*Before each flight, the bolt tightness needs to be checked, sheer strength create by loose bolt could result into prop hub failure.
Please Note: Final balance check is suggested before flight due to external factors such as temperature, handling during transit may vary the balance of the propeller.