When Should You Replace / Upgrade Your Drone Propellers?

When Should You Replace / Upgrade Your Drone Propellers?

By the end of 2018, it is expected that the consumer drone market will grow to over $1 billion in sales. That number is not really a surprise since from farming to photography, the use of drones permeates a massive variety of industries. Not to mention, they are a great time to fly.

Whether you need to replace your propellers because they are damaged, or you’re just ready for an upgrade, the right propellers can enhance your drone game. From propellers to drone motor Xoar has the innovation to take your drone higher. You should replace your propellers with new (more enhanced) props if:

They’re damaged

Not only can having damaged props make flying noisier, but it can also increase the vibrations, which in turn can shorten the life of motor bearings due to a lack of balance. So, if you see any cracks, nicks, or deformations, it is time to replace your propellers. Never fly your drone if there are chunks or tips missing from your props.

You want it quieter

This can be particularly important if you fly in largely populated areas, as you’ll annoy fewer people with a quieter drone. The talented fellas over at Drone Gear reviewed Xoar’s beechwood drone propellers and found them to be almost 10 decibels quieter than their counterparts.

You need more agility

Updating your propellers can provide you with increased agility, if you upgrade to a stiffer material, your drone will be more responsive without added drift.

You fly in high altitude

If you want to take your drone to new heights, you should invest in stiffer propellers. The higher the altitude, the thinner the air, which means that to perform at the same ability as sea level, the thrust from the props must increase while in higher elevation. As such, performance degrades at approximately 3% per 1000 feet as you climb in altitude. Your drone has to work harder the higher it flies.

You want that new drone feeling again

Replacing your propellers can make it fly like it’s new again. If you’re upgrading from standard props to a more agile performance-based prop, you’ll see a drastic difference in performance. 

About Xoar

Xoar has been helping hobbyists fly better for over 40 years. Their dedication to innovation and technology allow them to offer high-quality products that out-perform their competitors. Xoar specializes in designing and manufacturing Aerial Propellers for Industrial UAVs, Mid-Large Size UAV, Civil Aviation, Ultralight Aircraft, LSA, Commercial applications, and RC Airplane market. Crafted from quality materials, A finished Xoar prop offers a reduced noise level, increased agility, low air friction, and accurate performance in the air

Go higher with Xoar at www.xoarintl.com

 

Tips for Cleaning and Maintaining Your Drone and Its Propellers

Tips for Cleaning and Maintaining Your Drone and Its Propellers

The popularity of piloting unmanned aerial vehicles (UAV), drones, is growing increasingly popular for commercial, artistic, and exploratory purposes, and for the enjoyment of amateur hobbyists. As is the case with so many other pieces of mechanical equipment, the more devoted you are to the care and maintenance of your drone, the more consistently, efficiently, and dependably it will operate for you.

For the most part, the maintenance of a drone is pretty basic. They should be given a pre-flight check before use and a post-flight cleaning and examination. Doing so generally doesn’t take all that much time but proves to be an excellent investment of time. The following is an overview of basic drone cleaning and maintenance tips that don’t require any specialized technical knowledge of the drone motor or its function, but will keep your drone in the air longer and performing better when it’s up there. It will also almost certainly save you a good bit of money in the long run.

Pre-Flight Checklist

  • Begin by checking the drone itself. Ensure that you have all of the necessary equipment and that the home point is set.
  • If you’ve got a camera on your UAV, be sure the lens cap is removed and that the SD card is present.
  • Make sure the onboard compass is calibrated and that the appropriate flight mode is selected; check signal and satellite strength, if applicable.
  • Check the drone propellers. Be sure that they spin freely but are appropriately tightened.
  • Check that the batteries are properly fitted and that they are an appropriate temperature.

Do environmental checks too. Let anyone near you know that you’re going to be flying a drone, and be aware of all possible obstacles, including trees and power lines, etc. Definitely be sure that you are in a safe, legal flight zone. If you’re flying your drone in an area shared by commercial, private, or passenger aircraft, you’re not only risking considerable legal jeopardy, but more importantly, risking the lives of those in the aircraft. Fly your drone only where it’s appropriate and always exercise reasonable caution.

Post-Flight Maintenance

Perhaps the most important feature of post-flight drone maintenance is propeller care.

  • Propellers should be cleaned after every flight. A good toothbrush or comparable small cleaning brush is great for propellers. As accompaniment to the toothbrush, some drone pilots swear by toothpaste as a cleaning medium. They brush the propellers free of any dirt or grime with the toothpaste and wipe it off with a lightly-moistened microfiber cloth, ensuring that the propellers are totally dry afterward. Others prefer isopropyl alcohol.
  • After the props are removed, clean the gears as well. Obviously you don’t want to get any toothpaste on any gears or any moving parts. Those can be cleaned with another (toothpaste-free) toothbrush or other small brush. Cans of compressed air can be helpful as well. Although be careful not to spray those too close to or too long at the gears. They can damage delicate mechanisms by freezing them.
  • Before returning the propellers to their housing, check them for any warping or hairline cracks, particularly near the hub. The easiest way to do this is to lightly bend them. If you note any cracks, warping or any other issues, throw the propellers away and get new ones. Investing in some new propellers, even the most expensive ones, is literally a very small price to pay when compared to a crashed drone that was worth many hundreds of dollars.

About XOAR

For over 40 years, XOAR has been recognized as an industry leader for their innovation and the fantastic quality, efficiency, and precision of their RC propellers and the rest of their UAV accessories. Their use of leading-edge technology and the best material, engineering, and manufacturing has further established that reputation. Their specialization includes propellers for LSA, ultralight aircraft, industrial UAVs, Civilian Aviation, commercial applications, mid-to-large size UAVs, RC Airplanes, and more. XOAR’s propellers are noted for their quietness in flight, superior agility, low air friction, and excellent performance overall in flight.

Soar to greater heights with your drone hobby or business, at www.xoarintl.com